Description

FLYWHEEL PULLER M26x1.50 RH, EXTRACTOR (2/STROKE MODELS see fitment list)
Fits most: **PLEASE CHCK THREAD SIZE BEFORE ORDERING**
Husaberg: 4 stroke 400cc, 501cc, and 600cc off-road models.
Husqvarna: Late 2 stroke models with CDI ignitions.
KTM: 125cc, 250cc, 300cc, 360cc, 495cc XC and MX 2 stroke.
ATK Rotax models.
Classic: Bultaco, Ossa, Montesa, KTM, Husqvarna, Sachs, Puch, Zundap, Cannondale 440 speed models.
Compatible models:
1996-1999 Husaberg FC400
1994-2000 Husaberg FC501
1993-1996 Husaberg FC600
1998-2000 Husaberg FC600
1996-2000 Husaberg FE400
1996-2003 Husaberg FE400E
1989-2000 Husaberg FE501
1996-2003 Husaberg FE501E
1993-1996 Husaberg FE600
2000 Husaberg FE600
1996-2000 Husaberg FE600E
2003 Husaberg FS400E
1998-1999 Husaberg FS600E
Tips on use:
Ensure the flywheel thread is clean of dirt and not damaged before screwing the puller in.
Use copper grease on the puller threads for long life.
Make sure the puller is fully screwed into the flywheel.
After tightening, use a hammer on the center and tap to jolt free (not always needed).
If using old flywheel pullers, make sure the threads are in good condition before use to avoid damage to the flywheel.