Description
YAMAHA , SUZUKI MIKUNI VM10/VM12/VM14/VM16 CARBURETOR FLOAT & PIN KIT FOR HONDA & YAMAHA MIKUNI VM CARBS (MMP0123830)
Intended for the following Mikuni carburetors:
SIZE
FLOAT IS ROUND WITH FLAT BOTTOM ROUND PART IS 26.5 OD
TOTAL WIDE 44.5
FLOAT THICKNESS 12.5 EACH SIDE
PIN LENGTH 25mm
PIN DIAMITER 2.5mm
- VM10/12/14/16SC for Suzuki K50 (with throttle slide Ø = 16 mm)
- VM10/12/14/16SC for Suzuki/Yamaha (with throttle slide Ø = 17 mm)
- VM16SH for Yamaha DT/RD/TY / Suzuki GT50, RM50C
Also fits the following NTS carburetors:
01-24-201 NTS-VM16SH & 06-64-101 NTS-VM16SC
| Additional Info |
The float level must be adjusted to the dimensions specified below. This is done primarily by bending the float tab upward or downward, and secondly — if the adjustment range of the tab is insufficient — by slightly bending the entire metal bracket holding the floats to allow more room for fine adjustment via the tab. See picture 2 for how to easily measure the level using a standard caliper! VM10/12/14/16SC = 22.5 (±0.5 mm) |
|---|
The product is suitable for
- Suzuki
- A50 (1971) 13252-06110 & 13252-46110
- A50-II/A50L (1972~74)
- A50K B/DB (1977~78)
- A50KM E22/E39 (1975~76)
- A50M (1975~76)
- A50P (1975-78)
- AC50/AC50L (1971~74)
- AC50B/DB (1977~78)
- AC50M (1975~76)
- AC50N/DN (1978-)
- AS50 (1971)
- F50/-2/-3/-4
- GT50K/P (B/EB/UB/N/EN)
- K10/K11/K15 80CC (~1969)
- K50
- K50-I (1970)
- K50-II/K50K/K50L (1971~1974)
- K50B/DB (1977~78)
- K50M (1975~76)
- K50N/DN (1978~82)
- K50Z/DZ (1983-)
- M12/M15 50CC (-1969)
- M30/M31
- MT50R/J/K Trailshopper (1971~73)
- OR50
- PV50 Trailshopper (1979~91)
- RM50 C/N/T/X/Z
- RV50A/C (1977-)
- RV50K/L (1972~74)
- RV50M (1975~76)
- TS50ER (1979-83)
- TS50X (1984-00)
- ZR50K
- ZR50SK
- ZR50SL
- Yamaha
- BOP_LB3
- Chappy LB50/LB2
- DT50M
- FS80
- RD50M
- TY50
